Vexcel Map API Constants

# static constant BuiltInLayers

New properties

Properties:

Name	Type	Description
`URBAN`	string	Urban, Osprey cam, only for v2.0 maps
`URBAN_G`	string	Urban G, Geomni data, only for v2.0 maps
`URBAN_R`	string	Urban R, Condor data, only for v2.0 maps
`GRAYSKY`	string	GraySky, Osprey cam, only for v2.0 maps
`GRAYSKY_G`	string	GraySky G, Geomni data, only for v2.0 maps
`WIDE_AREA`	string	Wide area, Condor cam, only for v2.0 maps

# inner constant 3DEvents

Events triggered by 3d availability event

Properties:

Name	Type	Description
`STOP`	string	Data not available
`DOWNLOADING`	string	Downloading data
`FINISHED`	string	Finished downloading available data

# inner constant AreaUnits

Area Units

Properties:

Name	Type	Description
`METRIC`	Array.<string>	Metric system
`km2`	string	Square kilometer
`ha`	string	Hectare
`m2`	string	Square meters
`IMPERIAL`	Array.<string>	Imperial values system
`mi2`	string	Square miles
`ac`	string	Acre
`yd2`	string	Square yards
`ft2`	string	Square feet

# inner constant BuiltInLayers

Vexcel layer name for BuiltInLayers

Properties:

Name	Type	Description
`BLUESKY`	string	BlueSky ultra, Osprey cam, not available in v1.0 maps
`BLUESKY_G`	string	BlueSky ultra G, Leica/Midas data, not available in v1.0 maps
`BLUESKY_HIGH`	string	BlueSky high res, Condor data, not available in v1.0 maps
`GRAYSKY`	string	GraySky ultra, Osprey cam
`GRAYSKY_G`	string	GraySky ultra, Geomni data
`BLUESKY_EUROPE`	string	BlueSky ultra, Osprey cam, not available in v1.0 maps
`BLUESKY_OCEANIA`	string	BlueSky ultra, Osprey cam, not available in v1.0 maps
`BLUESKY_HIGH_EUROPE`	string	BlueSky High res, Condor, not available in v1.0 maps
`BLUESKY_HIGH_OCEANIA`	string	BlueSky High res, Condor, not available in v1.0 maps

# inner constant FeatureEvents

Events triggered by feature

Properties:

Name	Type	Description
`FEATURE_CLICK`	string	Triggered when user clicks on a feature
`FEATURE_HOVER`	string	Triggered when user hovers over a feature

# inner constant LengthUnits

Length Units

Properties:

Name	Type	Description
`METRIC`	Array.<string>	Metric system
`km`	string	Kilometer
`m`	string	Meters
`IMPERIAL`	Array.<string>	Imperial values system
`mi`	string	Miles
`yd`	string	Yards
`ft`	string	Feet

# inner constant MapEvents

Events triggered by map object

Properties:

Name	Type	Description
`POINTER_MOVE`	string	Triggered when a pointer is moved. Note that on touch devices this is triggered when the map is panned, so this is not the same as moving the mouse.
`MOVE_END`	string	Triggered when map finishes moving
`MOVE_START`	string	Triggered when map starts moving
`TILES_START_LOAD`	string	Triggered when map starts to load tiles
`TILES_END_LOAD`	string	Triggered when map finishes loading tiles
`MAP_INITIALIZE`	string	Triggered when map finishes the initialization
`LAYER_AOIS`	string	Triggered when layer receives data layer data with AOIs
`CLICK`	string	Triggered when single click over the map
`DBL_CLICK`	string	Triggered when double click over the map
`FEATURES`	string	Trigger when click on a feature *
`STATUS_3D_MEASURES`	string	Triggered when 3d measure status is updated
`CHANGE_MEASURE`	string	Triggered after a measurement is created or edited with the measurement tools
`FINISH_MEASURE`	string	Triggered when a measure is finished
`START_MEASURE`	string	Triggered when a measure is started
`NO_3D_IMAGES`	string	Triggered when no images to 3D mode
`CENTER_DATE_IMAGE`	string	Triggered when center date image change

# inner constant MapOrientation

Map Orientations

Properties:

Name	Type	Description
`V`	string	Vertical orientation
`N`	string	North orientation
`S`	string	South orientation
`E`	string	East orientation
`W`	string	West orientation

# inner constant MeasurementTools

Tools for drawing geometries and taking measurements

Properties:

Name	Type	Description
`POINT`	string	Tool for drawing points
`LINE`	string	Tool for drawing lines
`POLYGON`	string	Tool for drawing polygons
`HEIGHT`	string	Tool for drawing height
`RELATIVE_ELEVATION`	string	Tool for drawing relative elevation
`RECTANGLE`	string	Tool for drawing boxes/rectanges

# inner constant MeasureSystem

Measurement Systems

Properties:

Name	Type	Description
`METRIC`	string	Metric system
`IMPERIAL`	string	Imperial system

# inner constant ObliqueProjections

Set how the vector layer will reprojects itself in oblique mode

Properties:

Name	Type	Description
`NONE`	string	The layer won´t be reprojected in oblique mode.
`DTM`	string	The layer will be reprojected in oblique mode using the dtm.
`DSM`	string	The layer will be reprojected in oblique mode using the dsm.

# inner constant SlopeUnits

Slope Units

Properties:

Name	Type	Description
`METRIC`	Array.<string>	Metric system
`deg`	string	Degree
`rad`	string	Radians
`%`	string	Slope percentage
`IMPERIAL`	Array.<string>	Imperial values system
`rise/run`	string	Rise/run
`%`	string	Slope percentage

# inner constant ViewMode

View Modes

Properties:

Name	Type	Description
`2D`	string	Ortho Mode
`3D`	string	Oblique mode

Members

# static constant BuiltInLayers

Properties:

# inner constant 3DEvents

Properties:

# inner constant AreaUnits

Properties:

# inner constant BuiltInLayers

Properties:

# inner constant FeatureEvents

Properties:

# inner constant LengthUnits

Properties:

# inner constant MapEvents

Properties:

# inner constant MapOrientation

Properties:

# inner constant MeasurementTools

Properties:

# inner constant MeasureSystem

Properties:

# inner constant ObliqueProjections

Properties:

# inner constant SlopeUnits

Properties:

# inner constant ViewMode

Properties: